Steel Security Doors Replacement Guide for Homeowners

The front door of your home must be durable while also being attractive and welcoming. When it comes to security doors, the most common option is a steel security door. Entry doors’ aesthetics are just as important as their ability to endure the elements, such as wind, rain, sun, and would-be burglars.

Unfortunately, for many front doors, satisfying those requirements is a difficult task. Wood or wood veneer is used to construct most older ones, which bend, fracture, and delaminate due to years of exposure to the weather.

Steel Security Door

Read More

How to Install a New Front Door

In some cases, replacing a door simply entails substituting one door, known as a slab or blank, with another door. If the existing door frame, which includes the door jambs and threshold, has started to decay, you may have to tear it out and replace it. This is particularly true if the door jambs and threshold are rotting. To install the steel security door, you may need to replace the wooden frame.

The wall studs to which the old door frame is connected might bend and settle out of square, even though the door frame itself is in good condition. As a result, opening and shutting the door has become more challenging. For a new wood door to hang appropriately in a frame out of alignment, planning the top and bottom edges or possibly trimming one of these edges will be required. Wood doors are the only ones that can be planed or cut in this manner; metal and plastic doors cannot.

Prehung Front Doors

New doors are almost always prehung, which means they hang on hinges inside a new frame rather than being attached to them after installation. A kind of weatherstripping is also included in these systems. If the original structure is in poor condition or if the frame is being removed to expand the aperture, prehung doors are an excellent option.

For starters, establish whether you need a left-handed or right-handed door when replacing your existing door with a steel security door unit. Face the outside while standing in the doorway. Right-hand doors are indicated by the lockset being on the left.

If you want to be sure you get the right jamb size, take measurements of both the height and breadth of the current door jamb between the inner margins of the casing. Frame height should be increased by 1/2 inch, while breadth should be increased by 1/2 inch to 3/4 inch. The door’s width is measured across its face. The majority of doors are 3-3 (36 inches) or bigger in width.

Steel Security Door

Learn More

Why steel security doors?

Choosing a steel security door is your best option if security and durability are your main concerns. Steel doors are more durable and won’t break or warp like wood or fiberglass ones. Using an auto-body repair kit, you can dig out any dents or dings on these doors and putty them back together. Wood doors can be cheaper than steel doors, but they can also be more expensive. Steel doors with sidelights and high-quality hardware can be almost as expensive as wood doors.

The inner frame

For better strength, wood or steel inner frames are used in the construction of all steel doors. High-density foam insulation is used to fill the holes in the frame of the building. The skin and structure of most premium doors are made of 24-gauge steel, while others are made of heavier-gauge steel (represented by a lower number). Depending on the style, the surface is generally smooth or embossed with a wood-grain design.

Most steel security doors need to be painted at least once every few years with a polyester coating. To increase weather resistance, premium versions are coated with a layer of vinyl similar to that seen on vinyl-clad windows. Some models also have a stainable wood-fiber covering or, in the case of the most expensive models, a laminated wood veneer.

For the most part, steel doors are part of a prehung system. Remember that steel doors come prehung with hinges or holes for the hinges already predrilled if you’re merely removing the old door from its hinges and replacing it. There must be a match between the hinge area on the new door and the hinge area on the current door frame. Some doors are predrilled with an additional hole for the hinges, which enables minor modifications as the door is being installed.

Comments are closed.